Anyone can build solar panels. You can build solar panels for your home yourself too even if you don’t have experience building them. All you need is a dependable guide that contains step by step instructions in building solar panels. You will surely have huge savings in on your electric bills.
The process of building solar panels for your home only takes a couple of minutes. Once you build it, it will provide you with free energy coming from the sun. With just around $100 or so, you can already build your own solar panel and just install upgrades in order to generate more power.
The first step in building your own solar panels is to gather all the materials that you need. You will need wood glue, any solid board and solar cells. Solar cells can be purchased from your local hardware store or you can also order online. Although wiring one solar cell to another only takes a few minutes, it is best to buy pre-tabbed or wired ones since they only cost a few bucks.
As you probably know, solar cells are really fragile. With this fact, it’s really important that you mount them on a piece of solid board. The most common type of solid board that’s being utilized by most people is plywood. It’s used by most individuals as it’s not difficult to work on. Also, you can choose to use thicker wood pieces for the frame which at least 1 quarter inch thick. Aside from that, pegboards as well as Plexiglas can be used too.
Before making any cuts, it is best to measure the amount of surface that the solar cells need. Make sure to cut the wood a few inches larger than the space needed as this will serve as the frame and will be needed for last minute alterations. Cut the frame a couple of inches larger than what is intended and use the thicker piece of wood on the sides. The thick wood on the sides will serve as a frame that will keep the solar cells from getting wet.
Once you’re down making the frame and the board, make sure to use wood glue or sealant on any holes. Find any holes and use a sealant to cover them. Your solar cells will definitely last for years.
Wiring the cells together is an intricate process that requires some patience. If you were unable to find any pre-tabbed cells, you can solder each cell together by using either uncoated copper wiring or coated copper wiring. Uncoated copper wiring is raw copper while the other is your regular wires protected by a rubber.
When the cells get wired together, just mount them unto the solid base or plywood. The use of wood glue and non-conductive adhesive would really help you connect the wires to the charge controller so it can begin charging batteries. You can utilize an inverter so you can convert the power that’s from the batteries into home appliance voltages.
With all these things in mind, you will have solar panels for your home. Just make sure you have a good and reliable guide in building solar panels for your home with you. In no time, you will surely see huge savings on your pocket.